Microsoft Xbox 360 Controller for Windows Drivers Download. Using outdated or corrupt Microsoft Xbox 360 Controller for Windows drivers can cause system errors, crashes, and cause your computer or hardware to fail. Furthermore, installing the wrong Microsoft drivers can make these problems even worse.

[:en]

Fix Xbox 360 Controller Driver Not Working in Windows 10.

Is your Xbox 360 wireless controller not recognized or isn’t detected by Windows 10? Are you also facing any problem with Xbox 360 Controller Driver in Windows 10? It is commonly reported by the users that Xbox 360 controller is not working with Windows 10. If your controller is suddenly not working as it used to be, or should be, then you are at right place. In this post we will help you fix the following issues.

• How to setup download and install Xbox 360 Controller Driver for Windows 10?
• How to Fix Xbox 360 controller driver not working in windows 10?

Many PC games let you play with an Xbox controller instead of a keyboard or mouse. The Xbox 360 Controller for Windows can be easily installed on any PC that has an available USB port and is running Windows 10, Windows 8.1, Windows 8, or Windows 7.

Note A standard Xbox 360 wired controller can be connected to a Windows PC by way of the USB port, but drivers must be installed before the controller will work. Install using the installation CD: To install the software using the installation CD that came with your Xbox 360 Controller, follow these steps. Using Xbox 1 Controller on an xbox 360 is it possible to change the driver software of the xbox 1 controller so we can use it on the xbox 360 and the same goes to xbox 360 change driver software so it can be used on the xbox 1 but you will need a wire though it would save alot of time if the person has an xbox 1 or 360 and also a.

Many gamer like to use their Xbox 360 Controller with Windows 10 while playing their favorite games. This is great if you don’t want to spend money on additional controller, but there have been reports that Xbox 360 Controller Driver not Working in Windows 10, and today we’ll fix that.

Procedure 1: Install the driver manually.

If you’re using wireless Xbox 360 controller, set up install your Xbox 360 wired controller on Windows 10. But, you should update the drivers for wireless receiver timely, or may be your Xbox 360 controller will not work on windows 10. Whenever the latest version of drivers is released, update the drivers for your receiver.

Driver For The Xbox 360 Controller

If you are a beginner, don’t worry. Here is a step-to-step guide to update Xbox 360 controller driver for your receiver and fix Xbox 360 controller driver not working . All you need to do is follow the below steps:

• First, open the Device Manager. You can retrieve Device manager by clicking on Windows Key + X and a list will be displayed on the screen. Simply select Device Manager from it.

• When you open the Device Manager then make sure your receiver is connected to your PC. Navigate to other device section and enlarge it. Right Click on the Unknown Device and then choose the option “Updated driver software” from the menu.

• You will see an option mentioning “Browse my computer for driver software”, tap this option.

• Now click on let me pick from a list of device on my computer.

1. Now, you are able to see a list of devices, you need to select Xbox 360 peripherals from that list and click “Next”.

1. Select the latest Receiver driver option which is given on the list and then click on the Next button. If you get a pop-up, just click on OK button and wait for the driver to install on your PC.
2. At last all you need to hold the pairing button on your Bluetooth receiver and on your Xbox 360 Controller for few seconds. After you follow this procedure, your computer will definitely recognize your controller.

Once the installation of the driver is finished, your Xbox 360 driver windows 10 will start working on your Window 10 System without any difficulty.

Procedure 2: Uninstall the driver

Periodically Xbox 360 controller may not work on Windows 10 because of the outdated or unmaintained drivers, and if that is the reason, your Xbox 360 controller is not functioning properly, the best way is to uninstall the already existing driver and allow the Windows to install it again.

To uninstall the driver, you can follow the below-described steps:

1. Open the Device Manager.
2. In Device Manager select the open button to Xbox 360 Wireless Receiver for Windows and right click on it.
3. Select the Uninstall option from the menu.

• When the driver has been uninstalled successfully, restart your computer. When your computer restarts, Windows 10 will automatically install the missing driver.

Procedure 3: Install the latest drivers.

Buy Used Xbox 360 Controller

Sometimes our window system does not recognize Xbox 360 Controller driver for Windows 10 and the reason may be the outdated versions of drivers installed and if that is the problem then make sure that your Windows 10 is updated with the latest versions.

Check for the essential drivers required for your Windows 10 and download them. After the downloading process is over, you can install the right driver and your Xbox 360 controller will start working again in your Computer.

As per reports, if you are using third party receivers as well, and don’t use Microsoft receiver, it even works without any difficulties as long as you install Microsoft drivers.

If you don’t have the time or observe any difficulty to update the Xbox 360 driver manually, you can do it automatically with Driver Restore.

Why We Recommend Driver Restore?

While updating drivers for your Xbox 360 controller, it is essential to look for the right drivers to be updated and recent updates of those drivers. Well, mostly users seem it like a tedious and time consuming task.

Thus, we recommend you to use Driver Restore to make it easier for you. Driver Restore is the most widely used software for updating drivers in Windows 10, 8.1, 8, 7, Vista & XP. This tool will scan entire windows system to identify the outdated or missing drivers on your PC and checks for the latest updates of those drivers.

Xbox 360 Controller Driver Windows 10

Once it identifies the drivers which requires updates, it automatically starts downloading the most up-to-date versions of drivers and installs them properly.

Driver Restore ensures the performance of your system along with updated software and drivers.

Update Xbox 360 Controller Drivers Using Driver Restore

To know how to use Driver Restore, you can follow the below mentioned steps to update Xbox 360 controller drivers for Windows 10:

• Download the Driver Restore software.
• After installation, when you run the downloaded software, it scans the system and provides a list of outdated or missing drivers.
• A window will pop up with all the missing or outdated drivers will appear on the screen. The drivers to be updated will have a warning sign against their names.

• Select the driver and click on the Update Selected Driver button. The driver will start downloading the updates.
• Within few minutes, the latest version of the driver will be downloaded.
• Open the downloaded file and execute a normal installation process.
• Once the installation process is over, a window will appear to confirm the successful installation of the driver. If the installation is successful, click ‘Yes’, in case it is not, select ‘No’.

If there are more than one drivers to be updated, wait for all the drivers to be updated. Once the process of software update is complete, restart your system.

[:]

Note The USB ports on the front of your computer may not be powered USB 2.0 ports. Try using one of the ports on the back of your computer.

A green light on the receiver indicates that the unit is working.

Microsoft Xbox 360 Controller Drivers

3. If the Add New Hardware Wizard starts automatically, select Install the software automatically (Recommended), and then select Next. If the wizard installs the software successfully, select Finish and then skip to Step 3: Connect the Xbox 360 wireless controller to your computer, below.

   If the wizard fails to install the software, continue to Step 2.

Step 2: Install the Xbox gaming receiver software

Is The Xbox 360 Controller Driver Patented For Windows 10

If you have the installation disc that came with your Xbox 360 Wireless Gaming Receiver, you can install the software from that disc. If you don’t have the disc, you can install the software by downloading it online.

Install using the installation CD:

1. Insert the installation disc into the CD or DVD drive of your computer. If the setup program doesn’t automatically start, browse to your CD or DVD drive and run the setup program.

2. Follow the steps to install the software.

   Note You might be prompted to restart your computer after the installation is complete.

Xbox 360 Controller Driver For Windows

Download bitlocker for windows 10 home. Install by downloading the software:

1. Go to the Software Downloads section of the Microsoft Hardware website.
2. In the Search for download field, type 'Xbox' and select Gaming as the product type.
3. Select Xbox 360 Wireless Controller for Windows as the product (this is the software for the wireless gaming receiver).
4. Select the version of Microsoft Windows you’re using on your computer, select your operating system language, and then select Download.
5. Select Run.
6. The Xbox 360 Accessories setup program installs the necessary files to your computer.

   Note You might be prompted to restart your computer after the installation is complete.

Xbox 360 Controller Driver Mac

Step 3: Connect the Xbox 360 wireless controller to your computer

Wireless Xbox 360 Controller Driver

1. Turn on the Xbox 360 wireless controller by pressing and holding the Guide button .
2. On the receiver, press the connect button, which is a circular button located near the middle of the receiver. The light will flash green.